Pricing may change depending on your location, the risks/hazards associated with the job, and the amount of resources needed for your job. The more equipment you need at once the better rates we may be able to offer you if your job is in our primary coverage area.
This is a 75 ft Altec elevator forestry bucket truck with an 11 cubic yard chip body. and the first full load of woodchips is free for us to dispose of. We can tow trailers as large as 22 ft with a weight of up to 14,000 lbs with a 2'' 5/16 ball hitch with a Flat RV-style plug. The price includes Ropes, Rigging gear CDL Class A driver who doubles as the bucket truck operator. Our trucks have LED strobe lights on the front and rear of the truck for added safety when working on or near roadways.
We can bring an 18'' wood chipper that can chip up all of your brush and lots of the wood to reduce the quantity of wood material you have to haul away on your jobs.
Our chipper does not have a winch, which makes it easier to feed the chipper with equipment.
It should be noted that we can't chip anything with dirt, trash, rock, metal, or any other type of non-wood materials!
The wood chipper price includes one wood chipper operator but does not include a tow vehicle.
Our 20 ft equipment trailers have pallet fork holders on both sides of the trailer and a toolbox built into the front that doubles as a 3 ft light storage space on the deck. This trailer can hold up to 10,000 lbs of equipment or payloads. The price (Does not include a tow vehicle).
We reserve the right to turn down any load for any reason such as but not limited to overweight payload, broken or damaged anchor points, lack of anchor points, or hazardous cargo.
This is a 528 Avant articulating wheel loader with a max lifting capacity of 2,100 lbs and has low-ground impacted turf tires.
This equipment comes with a standard bucket, pallet forks, and a rotating log grapple.
The equipment price only includes one Operator, and (Does not include a tow vehicle or trailer). The price of the transportation to the job site will need to be calculated once we know if you need any other resources as the transportation costs could be less if need a truck as well.
This is a Bandit SG-40 tracked Stump Grinder with the ability to grind out stumps to a depth of 12''. This piece of equipment can take on most size tree stumps but does best with stumps under 36'' in diameter.
The equipment price will include an equipment operator but (does not include transportation to the job site.
It should be noted that we must have Miss Utility mark around all tree stumps to be removed, and a copy of the Miss Utility site report before we can start the job.
These ground protection mats are 1/2'' thick and measure 8 ft long and 4 ft wide. They are made from extremely durable and flexible High-Density Polyethylene and are designed to take the weight of most equipment and large trucks depending on the ground conditions, especially in nicer yards where you don't want to leave large Tire ruts.
The day rate for these mats includes a single packet of 18 mats which can be loaded onto a truck or trailer that is already needed on your job site.
Our tree climbers were certified through TCIA Academy, have years of experience, and are capable of removing trees in the most difficult of locations.
It should be noted that we will need to look at the tree or trees before starting the job to determine the condition of the tree, accessibility, and hazards nearby to come up with a work plan.
We hold the right to turn down any tree for any reason including but not limited to the condition, accessibility, or hazards on or near the tree, or tre.
Our bucket truck operators have been certified as aerial lift specialists and have experience operating the most common brands of bucket trucks including but not limited to Altec, Versalift, Terex Hi-Ranger, and more. From over-center to rear-mount buckets 55' to 75' elevator bucket trucks.
Our operators are also licensed tree experts
capable of removing or pruning trees in the most difficult locations using ropes and rigging techniques to safely get the tree work done in a timely fashion.
Our ground crew members are trained in almost all tree ground operations such as supporting tree climbers, bucket truck operations, and crane work, and are familiar with most models from the brands of wood chippers such as Vermeer, Bandit, and Morbark.
Ground crew members are also trained in lowering and setting up ropes and some rigging gear.
Our Licensed Tree Experts have the training and the years of experience needed to handle almost every situation during most tree work operations without needing additional resources. In addition to having the required license to perform any tree work in the state of Maryland, our experts can handle many trees falling and pruning and timing during normal ground operations in open areas. Including but not limited to tree assessments up to lot/land clearing, and root excavation monitoring.
Our ground supervisors have years of experience managing construction sites ranging from small residential jobs to full-scale complex commercial jobs that may require working on roadways and or utilizing heavy mobile cranes while delegating between your crews and subcontractors to achieve the safest and most efficient job as possible with the available resources, job type, and other such factors like traffic, weather, and job accessibility so your job can continue even if you can't be there.
Our experienced CDL Class A CDL license allows them to operate vehicles over 26,000 lbs and tow trailers over 10,000 lbs with a combination weight of 80,000 lbs without needing a route permit so long as the vehicle and or trailer is not classified as a Hazmat vehicle, or does not exceed trailer or vehicle weight (GVWR).
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.